Correct operation steps for installation and construction of dehumidification dryer：
Nowadays, dehumidification dryers are more common in production and life. When using this mechanical equipment to dry some materials, you need to install it correctly. This requires the installer to know the correct operation steps for the installation so that the equipment can be used. After installation, it can be put into use normally.
When the desiccant dryer leaves the factory, there are generally related operation drawings with some installation dimensions. The installer must carefully study these drawings before installing the mechanical equipment, and then choose the one that can meet the installation requirements Site, the selected site should be convenient for storing the objects to be dried, and can facilitate the transportation of these objects to be dried, so that after the equipment is installed, the relevant drying operations can be better completed, and after the installation location is found , The installation site should be cleaned up to ensure that the equipment has a good installation environment. When installing the desiccant dryer, it must be installed according to the dimensions in the installation requirements. The installation drawings that come with the equipment generally show some dimensions of the installation, as well as some extreme dimensions, and there are The corresponding safety distance, when installing mechanical equipment, must be installed within the allowable size range of the installation to ensure the safe operation of the equipment, and to facilitate the maintenance and operation of the equipment in the future operation process, and during installation When installing, the installation location must match the equipment, and the installation workshop must ensure sufficient width and height. When installing the desiccant dryer, it is necessary to understand the correct operation steps in the installation and construction process to ensure that the mechanical equipment can be put into use normally after installation.
Dongguan Nijiasi Plastic Machinery Co., Ltd. is an equipment engineering manufacturing company specializing in the overall planning of plastic workshops, including: central water supply system, central feeding system, automated belt line, robots, manipulators, and unmanned injection molding workshops The overall design, non-standard automation design and so on.
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274