In the plastics processing industry, the products appear shrinkage, silver streaks, bubbles, cracks, flow marks, poor transparency, etc. The main reason for these poor quality is that the plastics are not fully dried before they are formed. The use of an integrated dehumidifying dryer can solve these problems. So what are the accessories for the three-in-one dehumidification dryer?
One, dehumidifier
1. It adopts touch-sensitive man-machine interface, internally uses PLC as main control, simple operation and stable operation;
2. Imported dehumidification wheel is adopted, with long service life;
3. Various temperatures and conveying parameters can be set on the touch screen, which is flexible and convenient;
4. Various alarms are displayed on the touch screen, which is convenient for monitoring, safe and reliable;
5. With delayed start and stop functions, it can better protect the electric heater and motor.
13 Three-in-one dehumidification dryer.jpg
Two, suction machine
1. High-pressure closed motor is adopted, with strong conveying capacity and stable production;
2, using a microcomputer control system, easy to control;
3. Equipped with an alarm device, when material shortage or failure occurs, an alarm will be issued to ensure that the equipment can operate normally.
Three, drying hopper
1. The barrel body is made of SUS202 stainless steel, and the inside is ground and polished to avoid dust generation due to dead corner friction;
2, an evacuation device is installed at the bottom of the barrel, so that no residual material remains in the pipeline;
3. Double-layer barrel design, saving energy;
4. Down-blowing design makes the temperature more uniform, and the blanking and heat dissipation are more balanced;
5. The cleaning door is designed to facilitate cleaning.
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274