simple description: standard plastic resin dryer：Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics,standard resin dryer
Product alias: standard plastic resin dryer，plastic resin dryer， resin dryer，Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics,standard plastic pellet material dehumidifierr
standard plastic Product introduction
standard plastic pellet dehumidifier parameter
Standard Dehumidifying Dryer 1. This series adopts the microcomputer P. I. D. temperature control system to control the temperature accurately; 2. Adopting Nigas brand full molecular sieve honeycomb dehumidification runner imported from Japan, the dehumidification effect is better and more stable; 3. Enlarged and equipped with detachable cooler, easy maintenance and lower return air temperature; 4. High-density return air filter to ensure that the honeycomb runner is not polluted by raw material dust; 5. Double-layer insulation and downward blowing stainless steel dryer; 6. The feeding system is equipped with an evacuation shutoff valve (quickly disassembled) to ensure that there is no residual material in the pipe; 7. Hot material conveying can be equipped with a closed conveying device of hot air loop, which can effectively avoid raw material pollution and moisture resurgence; 8. Optional optical grade hopper dryer to suit the production of optical grade and food grade products; 9. The filter is designed with a transparent window, which can observe the use of the filter and clean or replace it regularly; 10. The snap-on sealing plate design makes later maintenance and repair more convenient; 11. The dew point of the air after dehumidification can be as low as -40°C.
standard plastic pellet dehumidifier Equipment principle
Standard Dehumidifying Dryer The standard plastic resin dryer is the most effective and economical model for drying plastic raw materials. It can dry raw materials that are wet due to packaging, transportation or recycling. The hopper is made of stainless steel, with the functions of "hot air blowing down" and "cyclone exhaust" as well as a double-layer insulation barrel, which is especially suitable for drying engineering plastic materials with a dehumidifier.
The air blown by the drying fan becomes high-temperature dry air after drying and electric heating. Through the unique design of the lower blowing pipe, the hot air is evenly dispersed in the insulation barrel to dry the raw materials; the hot air recovery device is optional, and the air blown out is filtered and then dried The wind blows out, forming a closed loop. Drying and dehumidifying part: The hot and humid air returned from the drying barrel is cooled and blown into the honeycomb runner. The moisture in the air is adsorbed by the runner and then desorbed by the regeneration heating air. The two airflows act on the runner at the same time, and with the rotation of the runner, the moisture in the air is continuously adsorbed and then desorbed by the regeneration air to be discharged, forming a stable low dew point air, which is heated to the plastic The drying temperature is blown into the drying barrel to form a closed cycle to dry the raw materials. Suction part: Suction material is sucked into the dry bucket from the storage bucket or other storage container. When the reed switch of the vacuum hopper detects that there is no material, the suction motor runs to generate vacuum in the vacuum hopper. The raw materials in the bucket are sucked into the vacuum hopper due to the air pressure difference. When the suction time is completed, the suction motor stops running, and the raw materials fall into the drying bucket due to their own weight. The dried raw materials are pumped from the drying barrel to the photoelectric hopper or micro-motion hopper installed in the plastic molding machine. can dry to a moisture content below 0.02%, and solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, and insufficient product physical strength.
Dehumidification and drying feeding equipment series are composed of: non-heat dehumidification dryer, heat preservation type drying barrel and all stainless steel suction machine. The suction machine can transport the raw materials from the drying barrel to the forming machine, and can also transport the raw materials from the storage barrel to the drying barrel. According to customer needs, a kind of raw material can be delivered to two molding machines, vacuum motors and safety filter dust collectors are installed inside the machine. According to the production needs of different products, we can provide a powder-removing suction machine to separate the powder in the raw material and capture it. This device has a compact structure and is suitable for the production of precision injection products using engineering plastics such as connectors, precision gears, mobile phone communications, digital cameras and product size requirements, so that the moisture content of the raw materials after wet and dry is low and stable, which can meet strict requirements Technical and quality requirements.
Most engineering plastics are hygroscopic. When the plastic is taken out from the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere.
If it is a conventional hot-air barrel dryer, it is Humid external air can dry the plastic, so it cannot prevent the plastic from continuing to absorb moisture.
1. The internal circulation of the dehumidifier: through the operation of the compressor → discharge high-temperature and high-pressure gas through the exhaust port → enter the condenser for cooling → become a low-temperature and high-pressure gas → pass through the capillary tube → become a low-temperature and low-pressure liquid → evaporate and suck through the evaporator Heat → until the compressor becomes a low-temperature and low-pressure gas. So it goes back and forth.
2. The external circulation of the dehumidifier: under normal startup → through the operation of the fan → moist air is sucked in from the air inlet → passes through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → Pass through the condenser to dissipate heat → blow out from the air outlet.
standard plastic pellet material dehumidifierr application
Standard Dehumidifying Dryer Plastic resin dryers can be widely used in civil air defense engineering, tobacco factories, pharmaceutical factories, scientific research, industry, medical and health, instrumentation, commodity storage, underground engineering, and computer rooms, archives, warehouses and other high humidity places to prevent instruments, meters, Computers, telecommunications equipment, medicines, materials, etc. are damaged by moisture, rust, and mildew. It can work normally when the relative humidity of the environment is within the range of 35-95% and the ambient temperature is 5-38 degrees Celsius. It is mainly used in basements, archives, precision instrument rooms, workshops and warehouses of pharmaceutical factories, electronic factories, industry, storage, etc., which require high relative air humidity. It can improve product quality, humidity hazards, and mold hazards. Everywhere in daily life. Therefore, it is necessary to add dryers to the above-mentioned environment. With the widespread use of engineering plastics, Dehumidifying dryers have gradually replaced traditional hot air dryers.
This is a device used to dehumidifying plastic resin to achieve drying. For example,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
standard plastic Granule dehumidifier series are mainly designed for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. Using the honeycomb runner with ceramic fiber as the base material, which represents the highest technological achievements of today, as the core component, the dry air provided can easily reach -40℃ dew point, and ideally it can reach -50℃ or even lower dew point , And the dew point temperature is stable, ensuring the high quality and stability of the molded plastic products. The whole series adopts P.LD. temperature control system as standard equipment; also provides PLC control with LCD touch-sensitive human-machine interface and can monitor the dehumidification effect of the machine Dew point meter is optional, the maximum drying air volume of this product can reach 3000m3/hr. The plastic before molding must be dried to an orientation ratio of less than 0.02%, which is completely bad, sprue adhesion, burrs, bubbles, silver bars, flow marks, cracks, dimensional stability and internal stress. Product defects (for example, insufficient physical properties and strength) are caused by sufficient dehumidification of the plastic before molding. Especially for PET, PBT, PA, PC and other high water absorption plastics, drying equipment with an ultra-low dew point of -40°C is required.
standard plastic Particle dehumidifier can be dried to a volume ratio of less than 0.02%, which solves the shortcomings of short circuit, gate adhesion, bubbles, silver bars, cracks, poor dimensional stability, internal stress and insufficient physical strength of the product. There are a lot more.
Mainly used in plastic products, automobiles, optical discs, experiments, communications, optics, etc.; the rotary honeycomb can reach a low dew point of zero bai for dehumidification and drying at -40°C. In the case of enhanced configuration, the dehumidification dew point can be as high as -50°C. It is a choice for high-precision industries.
standard plastic Granules material dryer Precautions
standard plastic dryer The water storage capacity of the standard plastic resin dryer is too full. To avoid overflowing and contaminating the ground, when you must move the body during operation, please unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to put it statically for four to six hours before starting to use it. Because the compressor pipeline in the dehumidifier contains cold coal, it must take four to six hours to return the cold coal to its original position after being moved. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. Clean the air filter and wash it with water below 40°C; it is better to clean it with detergent. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body. When cleaning the body, wipe it gently with a damp cloth; avoid directly splashing water for cleaning, so as not to damage the electrical insulation. Adhesives on the surface of the body can be cleaned with soap and water. Avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling paint or discoloration. Do not use thin rods or iron wires to dig out the inside of the machine to avoid malfunction or danger. Please unplug the power cord to maintain the life of the machine when it is out of power, not used for a long time, or when traveling. In fact, it is also very useful to connect to our lives. The standard plastic resin dryer consists of a compressor, a fan, and other components. The fan draws air in, and the heat exchanger condenses the moisture into droplets and then discharges it. (1) Ensure that the hot air is clean.
(2) Measures should be taken to prevent coke dust and avoid backflow of hot air.
(3) During the drying process of the material, all parts of the equipment in contact with the material must be cleaned and disinfected.
(4) For viscous materials, measures should be taken to minimize sticking.
(5) In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
(6) The exhaust air temperature is allowed to exceed the requirements to ensure product quality and safety.