Professional Dehumidifying dryer, plastic Dehumidifying dryer manufacturer

Dehumidifying dryer| RSS

Dehumidifying dryer

Technology

principle

Video

Accessories

Industry Application

Operation guide

Equipment

maintenance

About us

Welcome to join the professional website of polymer material dryer (models are: dehumidifying dryer, plastic dryer, three-in-one dehumidifing dryer, injection dehumidifier dryer, honeycomb dehumidifing dryer, crystalline dehumidifing dryer, plastic dehumid dryerifying, two-unit dehumidifying dryer, Plastic dehumidifier, resin dehumidifying dryer, PE dryer, PET dehumidifying dryer)! Provide a more comprehensive dehumidification dryer, plastic dehumidification dryer, plastic dehumidifier, dehumidification dryer, resin dehumidification dryer related dehumidification dryer machinery and equipment products, technology, design, patents, operation, cost budget, design the entire factory to install dehumidification Dryer planning, providing information on feasible energy-saving solutions! Feasible design solutions can reduce more costs for enterprises!

polymer Granules dehumidifier

polymer Details description
product name:polymer
release time:2020-09-12
Numbering:polymer dryer-001
Brand:wto-btb
Price:¥By function
weight :By function
unit weight:Kg/set
manufacturer:hengju
patent:hengju
Producing country:china
simple description:Plastic dehumidifiers are used to dehumidify plastics or resins to achieve drying and improve product quality, such as: PC, PET, PE, TPU, PPO and other materials
Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier,Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer,polymer pellet material dehumidifierr
  polymer Product introduction

polymer pellet dehumidifier parameter

There are many models of plastic dehumidifiers, and different parameters are set according to different products. The following is a general parameter table:
Model Drying Air Volume Drying Blower Power Regeration Fan  Renewable electric Cooling nozzle out/in wind dia. Dimensions Approx.Net Weight
  (m^3/hr) (KW)  (KW) (KW)  (inch) (inch) (cm)LxWxh (KG)
HF-80 80 0.75 0.2 3.8 3/4" 2 82×55×128 145
HF-120 120 1.1 0.375 3.8 3/4" 2 82×55×128 170
HF-150 150 1.5 0.375 5.4 3/4" 2 82×55×128 170
HF-200 200 2.2 0.375 5.4 3/4" 2.5 105×66×153 265
HF-300 300 3.8 0.75 7.2 3/4" 3 126×70×170 285
HF-400 400 5.5 0.75 7.2 3/4" 3 126×70×170 330
HF-500 500 7.5 1.5 10 3/4" 4 130×90×180 350
HF-700 700 2.2 2.2 12 3/4" 4 130×90×180 480
HF-1000 1000 3.7 2.2 12 3/4" 5 168×125×190 700
HF-1200 1200 3.7 2.2 12 3/4" 6 168×125×190 860
HF-1500 1500 5.5 2.2 15 3/4" 6 168×125×190 1100
HF-2000 2000 5.5 2.2 15 11/4" 8 210×141×196 1300
HF-2000 2000 3.7x2 2.2*2 12*2 11/4" 8 210×141×196 1400
HF-3000 3000 5.5x2 2.2*2 15*2 11/4" 8 224×220×210 1600
HF-4000 4000 7.5x2 2.2*2 20*2 11/4" 12 224×220×210 2200
polymer dryer

polymer pellet dehumidifier Equipment principle

1. The unit has high air pressure and uses top-out air to supply air.
2. The control part adopts advanced control components, which has the characteristics of high control precision and convenient adjustment.
3. The use of industrial fans has a long air supply distance, which is conducive to uniform temperature and humidity distribution in the room
4. The compressor is placed in the indoor unit, the whole system is more reliable, and it is equipped with high and low pressure gauges, which is convenient for equipment maintenance and repair
5. The original scroll type fully enclosed compressor is adopted, which is highly efficient and energy-saving
6. Taking into account the complex changes of the working environment, the system is equipped with complete automatic protection functions, such as high and low pressure protection, and fluorine deficiency related protection.
polymer dryer
7. Control system:
Electronic microcomputer temperature and humidity controller: digital temperature and humidity display, user parameter setting, easy operation and precise control; supporting high-precision temperature and humidity sensor, can automatically realize temperature and humidity control.
1. This machine adopts P.I.D. temperature control system, which can accurately control the regeneration temperature;
2. This series of dehumidification system adopts double cooler structure to ensure lower return air temperature and dew point;
3. Dry electric heating and temperature control meter are optional, and the drying barrel can be used to dehumidify and dry raw materials;
4. A return air filter is installed inside to ensure that the honeycomb wheel is not polluted by raw material dust.
TD-H series honeycomb rotary dehumidifier is mainly used for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. The honeycomb wheel used by our company can reach -40℃ under ideal conditions; the whole series adopt PID temperature control system as standard equipment, and also provide PLC control with LCD control touch man-machine interface for purchase, providing real-time The dew point meter that monitors the dehumidification effect of the machine is optional. There are 14 models in this series, and the maximum drying air volume can reach 4000m3/hr.

can dry to a moisture content below 0.02%, and solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, and insufficient product physical strength. Dehumidification and drying feeding equipment series are composed of: non-heat dehumidification dryer, heat preservation type drying barrel and all stainless steel suction machine. The suction machine can transport the raw materials from the drying barrel to the forming machine, and can also transport the raw materials from the storage barrel to the drying barrel. According to customer needs, a kind of raw material can be delivered to two molding machines, vacuum motors and safety filter dust collectors are installed inside the machine. According to the production needs of different products, we can provide a powder-removing suction machine to separate the powder in the raw material and capture it. This device has a compact structure and is suitable for the production of precision injection products using engineering plastics such as connectors, precision gears, mobile phone communications, digital cameras and product size requirements, so that the moisture content of the raw materials after wet and dry is low and stable, which can meet strict requirements Technical and quality requirements.
Most engineering plastics are hygroscopic. When the plastic is taken out from the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere.
If it is a conventional hot-air barrel dryer, it is Humid external air can dry the plastic, so it cannot prevent the plastic from continuing to absorb moisture.
1. The internal circulation of the dehumidifier: through the operation of the compressor → discharge high-temperature and high-pressure gas through the exhaust port → enter the condenser for cooling → become a low-temperature and high-pressure gas → pass through the capillary tube → become a low-temperature and low-pressure liquid → evaporate and suck through the evaporator Heat → until the compressor becomes a low-temperature and low-pressure gas. So it goes back and forth.
2. The external circulation of the dehumidifier: under normal startup → through the operation of the fan → moist air is sucked in from the air inlet → passes through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → Pass through the condenser to dissipate heat → blow out from the air outlet.

polymer pellet material dehumidifierr application

Plastic dehumidifiers are mainly suitable for underground engineering, national defense engineering, archives, libraries, factory workshops, warehouses, computer rooms, and environments that require temperature and humidity. The temperature-adjustable dehumidifier can automatically adjust temperature, cool down and dehumidify. The temperature-adjustable dehumidifier integrates dehumidification and refrigeration functions with adjustable cooling capacity, which is especially suitable for dehumidifying places in high temperature and high humidity environments with large thermal load changes. The unit automatically runs in the cold air dehumidification mode, and the heat generated by the unit is dissipated into the outdoor atmosphere through the outdoor unit; in the low temperature, cold and humid environment, the unit automatically runs in dehumidification conditions. The cooling dehumidifier has a refrigeration function while reducing humidity, but the refrigeration function is not adjustable. It is suitable for dehumidification occasions with large heat load and no relative humidity requirements.
The following are the corresponding parameters of general plastic or resin materials:

Plastic material

Dryer

Density
(kg/dm3)

Drying time(h)

Drying temperature
()

Atmospheric flow
(m3/kg)

Moulding moisture content

 Initial moisture contnt(%)

 ABS

0.55

2-3

 85

2

 <0.020

< 0.2

CAB 

 0.60

2-3

 70

 2

 <0.020

< 0.6

 EVA(2)

 0.60

2-3

 90-105

 1.8

-

 -

 EVOH

 0.60

2-3

 90-105

 2

 -

 -

 LM(4)

 0.50

 3

 600

 2

 <0.080

 <0.2

 LCP

 0.80

 3-4

 150

 2.2

< 0.01

 <0.05

 PA11

 0.60

 3-5

 70-80

 2

 -

 0.6-1.2*

 PA6.46.6

 0.60

 4-6

 70-80

 2

 0.15-0.02*

0.6-1.2*

 PAI

 0.85

 6-8

 180

 2

 <0.02

 -

 PAR

 0.70

 5-6

 120

 2

 <0.02

 -

 PBT

 0.80

 3-4

 130-140

 2.2

 <0.02

< 0.15

 PC

 0.65

 2-3

 120

 2

< 0.02

< 0.3

 PC/ABS

 0.65

 42798

 100

 2

< 0.020

 <0.1

 PC/PBT

 0.75

 3-4

 110

 2.2

 -

 -

 PE.HDEPE.LDPE black3%

 0.50

 1

 85

 1.6

 <0.01

 <0.02

PE.HDEPE.LDPE black40% 

 0.70

 2-3

 80-90

 2

 <0.02

 <0.2

 PEEK

 0.80

 3-4

 150-160

 2.2

 <0.05

 <00.1

 PE(1)(3)

 0.75

 4-5

 140-160

 2.5

 <0.01

 <0.2

 PEN(1)(3)

 0.86

 5-6

 150-170

 3

 <0.005

 -

 PES

 0.80

 3-4

 150-180

 2

 <0.05

 0.35

 PET

 0.84

 5-6

 160-180

 3

 <0.003

< 0.2

 PETG

 0.74

 4-5

 65

 3.5

 <0.01

 <0.1

 PI

 0.70

 2-3

 120

 2.2

 <0.02

 -

 PMMA-

 0.65

 3-4

 80

 3

< 0.02

 <0.3

 POM

 0.85

 2-3

 90-100

 2

 -

 <0.15

 PP

 0.50

 1

 80-90

 2

 -

 -

 PPO

 0.55

 2

 100-110

 2

 <0.01

 -

 PPS

 0.80

 2-3

 130-140

 2

 <0.01

 <0.03

 PS[GPPS.EPS.HIPS]

 0.55

 1

 80

 1.7

 <0.02

 <0.05

 PSU

 0.80

 3-4

 120-130

 2

 <0.05

 <0.1

 PIT

 0.80

 5-6

 130-150

 3

 <0.05

 <0.2

 PUR

 0.75

 2-3

 70-90

 2

 <0.02

 -

 PVC

 0.85

 1

 70-80

 1.4

 <0.02

 -

 SAN

 0.55

 2-3

 80

 2

 <0.02

 <0.1

 SB

 0.60

 1-2

 80

 2

 <0.02

 -

 TPE

 0.65

 2-3

 110

 2.2

 <0.05

 <0.3

 TPE

 0.65

 2-3

 80

 2.2

< 0.1

-

 TPO

 0.55

 3

 70-90

 2

 -

-

 TPU

 0.75

 2-3

 70-100

 2

< 0.02

 -

With the widespread use of engineering plastics, Dehumidifying dryers have gradually replaced traditional hot air dryers.

This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

polymer Granule dehumidifier series are mainly designed for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. Using the honeycomb runner with ceramic fiber as the base material, which represents the highest technological achievements of today, as the core component, the dry air provided can easily reach -40℃ dew point, and ideally it can reach -50℃ or even lower dew point , And the dew point temperature is stable, ensuring the high quality and stability of the molded plastic products. The whole series adopts P.LD. temperature control system as standard equipment; also provides PLC control with LCD touch-sensitive human-machine interface and can monitor the dehumidification effect of the machine Dew point meter is optional, the maximum drying air volume of this product can reach 3000m3/hr. The plastic before molding must be dried to an orientation ratio of less than 0.02%, which is completely bad, sprue adhesion, burrs, bubbles, silver bars, flow marks, cracks, dimensional stability and internal stress. Product defects (for example, insufficient physical properties and strength) are caused by sufficient dehumidification of the plastic before molding. Especially for PET, PBT, PA, PC and other high water absorption plastics, drying equipment with an ultra-low dew point of -40°C is required.
polymer Particle dehumidifier can be dried to a volume ratio of less than 0.02%, which solves the shortcomings of short circuit, gate adhesion, bubbles, silver bars, cracks, poor dimensional stability, internal stress and insufficient physical strength of the product. There are a lot more.
Mainly used in plastic products, automobiles, optical discs, experiments, communications, optics, etc.; the rotary honeycomb can reach a low dew point of zero bai for dehumidification and drying at -40°C. In the case of enhanced configuration, the dehumidification dew point can be as high as -50°C. It is a choice for high-precision industries.

polymer Granules material dryer Precautions

1. Under normal circumstances, the dehumidifier should be placed in the center, leaving enough space around, and the air inlet and outlet of the dehumidifier should not be covered by obstacles to keep the air unblocked.
2. Do not pull the power cord of the dehumidifier forcefully to move the dehumidifier during use.
3. When using the dehumidifier, the airtightness of the room should be good, otherwise, the dehumidification effect will not be obvious, and it will increase the load of the dehumidifier and affect the service life of the dehumidifier.
4. At present, most dehumidifiers on the market are equipped with computer automatic control systems, with four-speed fuzzy control gears. Except for the first gear when shutting down, they have suitable humidity (relative humidity: 70%-60%) and dry (relative humidity: 60%-50%) and continuous dehumidification (relative humidity: the lowest can reach 35%). When the indoor humidity is higher than the humidity of the corresponding selected gear, the machine will automatically start dehumidification; when the water tank is full, the machine will automatically stop working, and The water level indicator light is on to remind that the water tank is full, and the water must be poured out before the machine can operate again.
5. When the machine body must be moved, unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to let it stand for 4 to 6 hours before turning it on. Because the compressor pipeline of the dehumidifier contains refrigerant, after being moved, the refrigerant can only return to its original position after a period of time.
(1) Ensure that the hot air is clean.
(2) Measures should be taken to prevent coke dust and avoid backflow of hot air.
(3) During the drying process of the material, all parts of the equipment in contact with the material must be cleaned and disinfected.
(4) For viscous materials, measures should be taken to minimize sticking.
(5) In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
(6) The exhaust air temperature is allowed to exceed the requirements to ensure product quality and safety.
Links:  google Dehumidifying dryer baidu gravimetric blender Central feeding system
Ask for a quotation
WhatsApp

+8613669807274
Wechat

+8613669807274

wto-btb@wto-btb.com

Tel: +8613669807274

SMS: +8613669807274