Professional Dehumidifying dryer, plastic Dehumidifying dryer manufacturer

plastic resin polymer Granule dehumidifier| RSS

Dehumidifying dryer

Technology

principle

Video

Accessories

Industry Application

Operation guide

Equipment

maintenance

About us

Welcome to join the professional website of plastic resin polymer Granule material dryer (models are: Granule dryer,plastic resin polymer Granule material dryer,plastic resin polymer Granule dryer,plastic resin polymer Particle dryer,plastic resin polymer pellet dryer)! Provide a more comprehensive dehumidification dryer, plastic dehumidification dryer, plastic dehumidifier, dehumidification dryer, resin dehumidification dryer related dehumidification dryer machinery and equipment products, technology, design, patents, operation, cost budget, design the entire factory to install dehumidification Dryer planning, providing information on feasible energy-saving solutions! Feasible design solutions can reduce more costs for enterprises!

plastic resin polymer Granules dryer

plastic resin polymer Details description
product name:plastic resin polymer Granule dryer
release time:2020-09-05 11:21:32
Numbering:plastic resin polymer dryers-0
Brand:wto-btb
Price:¥By function
weight :By function
unit weight:Kg/set
manufacturer:hengju
patent:hengju
Producing country:china
simple description:Mainly used for the dehumidification of plastics, resins, PET, PE, PC, PPO, TPU, PLA and other plastics, so that the materials can be dried to improve the quality of plastic products
Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer
  plastic resin polymer Product introduction

plastic resin polymer Granule material dryer parameter

Model

Capacity(kg)

Heater(kw)

Blower(w)

Overall Dimensions(cm)

Model suitable

Weight(kg)

MHD-12E

12

1.8

50

65X40X85

1oz

25

MHD-25E

25

3

90

75X50X105

3oz

35

MHD-50E

50

3.9

100

90X55X120

5-8oz

45

MHD-75E

75

3.9

100

95X60X130

8-10oz

50

MHD-100E

100

6

250

100X70X140

10-20oz

70

MHD-150E

150

6

350

110X75X160

15-20oz

80

MHD-200E

200

12

350

120X85X170

20-30oz

120

MHD-300E

3300

15

350

145X100X185

25-30oz

120

MHD-400E

400

18

550

150X105X200

30-40oz

230

MHD-500E

500

21

750

150X105X210

40-50oz

250

MHD-600E

600

21

750

150X105X220

40-50oz

250

MHD-800E

800

27

750

150X110X240

50-60oz

300

MHD-1000E

1000

30

1100

185X135X270

60oz以上

400

MHD-2000E

2000

60

5500

1480X1800X3600

60oz以上

780

MHD-3000E

3000

64

7500

1600X2010X4050

60oz以上

1150


plastic resin polymer Particle dryer Equipment principle

The dehumidification methods of dehumidification dryer are:
1. Dehumidification by adsorption wheel
The thin plate impregnated with hygroscopic agent is processed into a honeycomb wheel for ventilation to achieve the dehumidification effect.
2. Liquid absorption dehumidification
plastic resin polymer dryer,plastic polymer dryer,resin polymer dryer,polymer dryer
There are two types of liquid absorption dehumidification, one is to use the spray of lithium chloride aqueous solution to absorb water, the dew point can be reduced to about, but the equipment is larger, and the absorption liquid must be replaced; the other is to use capillary action to absorb water on the solid On the moisture absorbent, the dew point can be reduced, but the equipment will also become larger when the adsorption area is large.
3. Compression and dehumidification
Compress and cool the moist air to separate its moisture to achieve dehumidification effect. It should be noted that this dehumidification method is effective in small air volume occasions, but is not suitable for large air volume.
4. Cooling and dehumidification
The air is cooled to below the dew point, and then the condensed moisture is removed to achieve the dehumidification effect. This method is effective when the dew point is above.
The dehumidifier dryer system (compressor, evaporator, condenser) reduces the temperature of the surface cooler below the dew point temperature of the air, and a fan draws moist air into the machine for heat exchange with the surface cooler. The humid air When the water vapor is condensed and formed into water droplets, it is discharged out of the body or into the water tank in the body, and dry air is discharged into the room. This circulation reduces the indoor humidity, and the humid space achieves a dry effect.
Industrial dehumidification dryers can also choose temperature-regulating dryers, which can adjust the temperature by themselves according to the degree of dryness of the product. Heavy-duty industrial dehumidification dryers are general, but general air dehumidification and drying are also available for drying.

can dry to a moisture content below 0.02%, and solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, and insufficient product physical strength. Dehumidification and drying feeding equipment series are composed of: non-heat dehumidification dryer, heat preservation type drying barrel and all stainless steel suction machine. The suction machine can transport the raw materials from the drying barrel to the forming machine, and can also transport the raw materials from the storage barrel to the drying barrel. According to customer needs, a kind of raw material can be delivered to two molding machines, vacuum motors and safety filter dust collectors are installed inside the machine. According to the production needs of different products, we can provide a powder-removing suction machine to separate the powder in the raw material and capture it. This device has a compact structure and is suitable for the production of precision injection products using engineering plastics such as connectors, precision gears, mobile phone communications, digital cameras and product size requirements, so that the moisture content of the raw materials after wet and dry is low and stable, which can meet strict requirements Technical and quality requirements.
Most engineering plastics are hygroscopic. When the plastic is taken out from the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere.
If it is a conventional hot-air barrel dryer, it is Humid external air can dry the plastic, so it cannot prevent the plastic from continuing to absorb moisture.
1. The internal circulation of the dehumidifier: through the operation of the compressor → discharge high-temperature and high-pressure gas through the exhaust port → enter the condenser for cooling → become a low-temperature and high-pressure gas → pass through the capillary tube → become a low-temperature and low-pressure liquid → evaporate and suck through the evaporator Heat → until the compressor becomes a low-temperature and low-pressure gas. So it goes back and forth.
2. The external circulation of the dehumidifier: under normal startup → through the operation of the fan → moist air is sucked in from the air inlet → passes through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → Pass through the condenser to dissipate heat → blow out from the air outlet.

plastic resin polymer pellet material dryer application

The contact surface of the fuselage is made of all stainless materials.
Precision die-cast aluminum shell, smooth surface, good heat preservation performance.
Silent fan, optional air filter to ensure the cleanliness of raw materials.
The proportional deviation indicating temperature controller is used to accurately control the temperature.
Both the barrel body and the machine base are equipped with sight windows, which can directly observe the internal raw materials.
The curved design of the electric heating cylinder avoids burning caused by the accumulation of raw material powder at the bottom of the cylinder.
The cast aluminum mold is independently designed, and the barrel is turned back to fit any manipulator.
Another 50-800kg insulation type is available: double-layer material barrel, stainless steel electric heating tube, heat dissipation electric heating tube.
Mainly used for the dehumidification of plastics, resins, PET, PE, PC, PPO, TPU, PLA and other plastics, so that the materials can be dried to improve the quality of plastic products With the widespread use of engineering plastics, Dehumidifying dryers have gradually replaced traditional hot air dryers.
This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

plastic resin polymer pellet dryer series are mainly designed for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. Using the honeycomb runner with ceramic fiber as the base material, which represents the highest technological achievements of today, as the core component, the dry air provided can easily reach -40℃ dew point, and ideally it can reach -50℃ or even lower dew point , And the dew point temperature is stable, ensuring the high quality and stability of the molded plastic products. The whole series adopts P.LD. temperature control system as standard equipment; also provides PLC control with LCD touch-sensitive human-machine interface and can monitor the dehumidification effect of the machine Dew point meter is optional, the maximum drying air volume of this product can reach 3000m3/hr. The plastic before molding must be dried to an orientation ratio of less than 0.02%, which is completely bad, sprue adhesion, burrs, bubbles, silver bars, flow marks, cracks, dimensional stability and internal stress. Product defects (for example, insufficient physical properties and strength) are caused by sufficient dehumidification of the plastic before molding. Especially for PET, PBT, PA, PC and other high water absorption plastics, drying equipment with an ultra-low dew point of -40°C is required.
plastic resin polymer Granule dryer, can be dried to a volume ratio of less than 0.02%, which solves the shortcomings of short circuit, gate adhesion, bubbles, silver bars, cracks, poor dimensional stability, internal stress and insufficient physical strength of the product. There are a lot more.
Mainly used in plastic products, automobiles, optical discs, experiments, communications, optics, etc.; the rotary honeycomb can reach a low dew point of zero bai for dehumidification and drying at -40°C. In the case of enhanced configuration, the dehumidification dew point can be as high as -50°C. It is a choice for high-precision industries.

plastic resin polymer Granule dryer Precautions

一. Precautions for operation of desiccant dryer:
1. Make sure that the dehumidification dryer has been installed and adjusted;
2. Turn on the power switch on the control box power supply and the dehumidifier panel;
3. Check the temperature indication of the material barrel frequently, and repair it in time if any malfunction is found;
4. When the temperature rises to the specified temperature, check whether it is consistent with the temperature of the lower part;
5. Keep the barrel full at any time during production;
6. The raw materials can be produced only after the specified drying time is fully reached;
7. When the drying is completed, when the machine is to be shut down, close the feeding plate first, and then close the feeding system after pumping the bottom raw materials.
 二. Maintenance of dehumidification dryer:
1. Please confirm to provide cooling circulating water before machine operation;
2. Regularly clean the dehumidification return air aluminum mesh and the recycled motor aluminum mesh;
3. Regularly check whether the pipeline is damaged, loose, or dew;
4. Regularly check whether the floating belt is worn.
(1) Ensure that the hot air is clean.
(2) Measures should be taken to prevent coke dust and avoid backflow of hot air.
(3) During the drying process of the material, all parts of the equipment in contact with the material must be cleaned and disinfected.
(4) For viscous materials, measures should be taken to minimize sticking.
(5) In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
(6) The exhaust air temperature is allowed to exceed the requirements to ensure product quality and safety.
Links:  google Dehumidifying dryer baidu gravimetric blender Central feeding system
Ask for a quotation
WhatsApp

+8613669807274
Wechat

+8613669807274

wto-btb@wto-btb.com

Tel: +8613669807274

SMS: +8613669807274