Professional Dehumidifying dryer, plastic Dehumidifying dryer manufacturer

plastic PET Granules dehumidifier| RSS

Dehumidifying dryer

Technology

principle

Video

Accessories

Industry Application

Operation guide

Equipment

maintenance

About us

Welcome to join the professional website of plastic PET Granules material dryer (models are: Granules dryer,plastic PET Granule material dryer,plastic PET Granule dryer,plastic PET Particles dryer,plastic PET pellet dryer)! Provide a more comprehensive dehumidification dryer, plastic dehumidification dryer, plastic dehumidifier, dehumidification dryer, resin dehumidification dryer related dehumidification dryer machinery and equipment products, technology, design, patents, operation, cost budget, design the entire factory to install dehumidification Dryer planning, providing information on feasible energy-saving solutions! Feasible design solutions can reduce more costs for enterprises!

plastic PET Granules dryer

plastic PET Details description
product name:plastic PET Granules dryer
release time:2020-09-16 11:26:34
Numbering:plastic PET Granules dryer-001
Brand:wto-btb
Price:¥By function
weight :By function
unit weight:Kg/set
manufacturer:wto-btb
patent:wto-btb
Producing country:china
simple description:Dehumidifying Dryer,3 in 1 plastic desiccant dryer,plastic dehumidifying dryer,PET,PE,PC,PPO,TPU
Product alias:plastic PET Granules dryer,plastic PET Granules dehumidifier,plastic PET pellets dryer, plastic PET Particle dryer
  plastic PET Product introduction

plastic PET Granules material dryer parameter

plastic PET Granules dryer
Three-in-one protection device
1. Total power supply overcurrent no-fuse circuit breaker;
2, fan overload protection;
3, high temperature trip protection;
4, material suction, material shortage alarm;
5. Overheat protection temperature switch;
  working environment
Indoor, dry environment, temperature should not exceed +45℃, humidity should not exceed 80%; So what is the difference between plastic PET dehumidifying dryer and ordinary dryer? Under what circumstances is the plastic desiccant dryer produced? To understand this problem, we must first talk about ordinary dryers. Ordinary dryers use electric heating to heat hot air to dry materials inside the space at a high temperature, so as to evaporate water from the materials. The incoming air heated by the electric heating is the air in the environment. This is what we usually call a hot air dryer. Therefore, under current weather conditions, incomplete drying of materials will occur. Because electric heating must first heat the incoming air, but the incoming air contains high moisture, how can the material be dried thoroughly? (Mainly reflected in materials with high moisture absorption rate, similar to nylon). In view of the above situation, firstly, the ambient air is drawn in to remove the moisture in the air at a low dew point, and then relatively dry air is used to heat the material into the dryer to dry the material. Therefore, the difference between these two dryers is that the moisture content of the inlet air used for drying is different. One has processed the inlet air moisture, and the other has not processed the inlet air moisture. The parameters of the plastic PET pellet dryer are different depending on the product, particle size or powder, and the drying and dehumidifying time parameters of the predetermined material are also different. For general, you can check the following comparison table.

plastic PET Particle dryer Equipment principle

plastic PET Granules dryer
1. The internal circulation of the dehumidifier: through the operation of the compressor → discharge high-temperature and high-pressure gas through the exhaust port → enter the condenser for cooling → become a low-temperature and high-pressure gas → intercept the flow through the capillary tube → become a low-temperature and low-pressure liquid → evaporate and absorb through the evaporator Heat → return to the compressor to become a low temperature and low pressure gas. This cycle is repeated.plastic PET Granules dryer
2. The external circulation of the dehumidifier: under normal startup → through the operation of the fan → inhalation of moist air from the air inlet → through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → Pass through the condenser to dissipate heat → blow out from the air outlet.

can dry to a moisture content below 0.02%, and solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, and insufficient product physical strength. Dehumidification and drying feeding equipment series are composed of: non-heat dehumidification dryer, heat preservation type drying barrel and all stainless steel suction machine. The suction machine can transport the raw materials from the drying barrel to the forming machine, and can also transport the raw materials from the storage barrel to the drying barrel. According to customer needs, a kind of raw material can be delivered to two molding machines, vacuum motors and safety filter dust collectors are installed inside the machine. According to the production needs of different products, we can provide a powder-removing suction machine to separate the powder in the raw material and capture it. This device has a compact structure and is suitable for the production of precision injection products using engineering plastics such as connectors, precision gears, mobile phone communications, digital cameras and product size requirements, so that the moisture content of the raw materials after wet and dry is low and stable, which can meet strict requirements Technical and quality requirements.
Most engineering plastics are hygroscopic. When the plastic is taken out from the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere.
If it is a conventional hot-air barrel dryer, it is Humid external air can dry the plastic, so it cannot prevent the plastic from continuing to absorb moisture.
1. The internal circulation of the dehumidifier: through the operation of the compressor → discharge high-temperature and high-pressure gas through the exhaust port → enter the condenser for cooling → become a low-temperature and high-pressure gas → pass through the capillary tube → become a low-temperature and low-pressure liquid → evaporate and suck through the evaporator Heat → until the compressor becomes a low-temperature and low-pressure gas. So it goes back and forth.
2. The external circulation of the dehumidifier: under normal startup → through the operation of the fan → moist air is sucked in from the air inlet → passes through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → Pass through the condenser to dissipate heat → blow out from the air outlet.

plastic PET pellet material dryer application

plastic PET Granules dryer,The three-in-one dehumidification dryer feed combination integrates three functions of dehumidification, drying and feeding in one machine, which is especially suitable for engineering plastic materials with strong moisture absorption such as Plastic ,risin,PET, PA, PC, etc.
1. The dehumidification dryer integrates dehumidification, drying and feeding functions, simple operation, convenient material change, and high work efficiency;
2. The dehumidification dryer is equipped with a honeycomb runner, which can obtain dry air with good stability and low dew point;
3. It can be used in the process application of optical products such as lenses, LCD backlights, optical discs, etc.;
4. It can be equipped with PLC control and LCD touch man-machine interface, centralized and convenient operation, and can control the automatic operation of the whole machine;
5. The closed feeding system can prevent the dried raw materials from re-moisture due to contact with outside air;
6. The dehumidification dryer machine occupies a small area and is easy to move, and the machine can be replaced at will.
plastic PET Granules dryer
Dehumidifying Dryer
1. High degree of automation reduces the labor intensity of operators;
2. The honeycomb runner using Japanese ceramic fiber as the base material has good dehumidification effect and stable and reliable performance;
3. It integrates three functions of dehumidification, drying and suction;
4. The feeding system is equipped with a shutoff valve to ensure that there is no residual raw material in the material pipe.
5. PID control of drying temperature and regeneration temperature;
6. PLC touch screen can be added, the operation is simple and clear at a glance;
7. Various complete protection circuits with dehumidification function after shutdown.
8. This series of dehumidification series adopts double cooler structure to ensure lower return air temperature and dew point. With the widespread use of engineering plastics, Dehumidifying dryers have gradually replaced traditional hot air dryers.
This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Material Initial Moisture Content Drying Time Drying temp.
ABS Acrylonitrile Butadiene styrene 0.6% 2~3 H 80℃
PA 6 Polyamide 6 1% 4~6 H 75℃
PA 66 Polyamide 66 1% 4~6 H 75℃
PA 6, 10 Polyamide 6, 106 1% 3~4 H 75℃
PA 11 Polyamide 11 1% 3~4 H 75℃
PA 12 Polyamide 12 1.8% 2~3 H 75℃
PC Polycarbonate 0.36% 2~3 H 120℃
PE Polyethylene 0% 1 H 90℃
PE Polyethylene w/carbon black 0.5% 3~6 H 85℃
PET Polyethylene Terephthalate 0.4% 3~6 H 160℃
PETG Polyethylene Terephthalate Glycol 0.1% 6 H 66℃
PBT Polybuthyleneterephthalate 0.4% 3 H 160℃
PI Polyimide 0.32% 3 H 120℃
PMMA Polymethylmethacrylate 0.7% 2~4 H 80℃
PSU Polysulfone 0.22% 3 H 120℃
POM Polyoxymethylene 0.25% 3 H 100℃
PP Polypropylene 0% 1 H 90℃
PPO Polyphenyleneoxide (Norl R) 0.13% 3 H 120℃
PS Polystyrene 0% 1 H 80℃
PUR Polyurethane 0.9% 3 H 90℃
PVC Polyvinyl Chloride 0.4% 1 H 70℃
SAN Styrene Acrylonitrile Copolymer 0.3% 2~3 H 80℃
SB Styrene Hi-impact 0.6% 2 H 80℃
lonomer(SurlynR) 1% 2~8 H 50℃
VPE Crosslinked Polyethylene 2% 6 H 50℃
KODAR PETG 6763 1.8% 4 H 66℃
PES Polyester 0.6% 4 H 75℃
CA Cellulose Acetate 1.3% 2~3 H 75℃
CAB Cellulose Acetate Butyrate 1.3% 2~3 H 75℃
CP Cellulose Propionate 1.3% 2~3 H 75℃
lonomer 1.4% 2~3 H 90℃
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

plastic PET pellet dryer series are mainly designed for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. Using the honeycomb runner with ceramic fiber as the base material, which represents the highest technological achievements of today, as the core component, the dry air provided can easily reach -40℃ dew point, and ideally it can reach -50℃ or even lower dew point , And the dew point temperature is stable, ensuring the high quality and stability of the molded plastic products. The whole series adopts P.LD. temperature control system as standard equipment; also provides PLC control with LCD touch-sensitive human-machine interface and can monitor the dehumidification effect of the machine Dew point meter is optional, the maximum drying air volume of this product can reach 3000m3/hr. The plastic before molding must be dried to an orientation ratio of less than 0.02%, which is completely bad, sprue adhesion, burrs, bubbles, silver bars, flow marks, cracks, dimensional stability and internal stress. Product defects (for example, insufficient physical properties and strength) are caused by sufficient dehumidification of the plastic before molding. Especially for PET, PBT, PA, PC and other high water absorption plastics, drying equipment with an ultra-low dew point of -40°C is required.
plastic PET Granule dryer, can be dried to a volume ratio of less than 0.02%, which solves the shortcomings of short circuit, gate adhesion, bubbles, silver bars, cracks, poor dimensional stability, internal stress and insufficient physical strength of the product. There are a lot more.
Mainly used in plastic products, automobiles, optical discs, experiments, communications, optics, etc.; the rotary honeycomb can reach a low dew point of zero bai for dehumidification and drying at -40°C. In the case of enhanced configuration, the dehumidification dew point can be as high as -50°C. It is a choice for high-precision industries.

plastic PET Granule dryer Precautions

plastic PET Granules dryer
he desiccant dryer should be cleaned frequently and kept clean. The dehumidifier should be placed in the center of the room. The air inlet and outlet of the refrigerated dryer should not be blocked by obstructions, and the air filter should be cleaned. When the ambient temperature is lower than 15℃, the water droplets attached to the surface of the evaporator will freeze and the effect of the dehumidifier will be weakened. If the ambient temperature exceeds 40℃, the pressure in the system will increase and the compressor will overload. At this time, the overload protector The circuit should be cut off, otherwise the compressor motor will be damaged. So the best temperature range for dehumidifier is 15℃~40℃. If the humidity in the air is below 30%, it will be too dry and uncomfortable. Therefore, a reliable humidity controller will control it to maintain the range of 50% to 60%. When in use, close doors and windows as much as possible to achieve dehumidification in the room. The body of the desiccant dryer must be placed flat, not tilted or turned sideways, to avoid machine failure or abnormal noise.
The water storage in the desiccant dryer is too full. In order to avoid overflowing and contaminating the ground, when you must move the body during operation, please unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to put it statically for four to six hours before starting to use it. Because the compressor pipeline in the dehumidifier contains cold coal, it must take four to six hours to return the cold coal to its original position after being moved.
Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. Clean the air filter and wash it with water below 40°C; it is better to clean it with detergent. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body. When cleaning the body, wipe it gently with a damp cloth; avoid directly splashing water for cleaning, so as not to damage the electrical insulation. Adhesives on the surface of the body can be cleaned with soap and water. Avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling paint or discoloration. Do not use thin rods or iron wires to dig out the inside of the machine to avoid malfunction or danger. Please unplug the power cord to maintain the life of the machine when it is out of power, not used for a long time, or when traveling.
Dehumidifying Dryer Do not use the machine in the following situations
1. There is a damaged line;
2. To prevent electric shock, do not run the machine on a wet floor or after the machine is exposed to rain;
3. If the machine is damaged or disassembled, it should not be overhauled and installed by professional maintenance personnel;
4. During the operation of the machine, at least 1m of surrounding space is required. Please protect this device and flammable materials at least 3m away;
5. Avoid vibration and magnetic influence in the work area;
(1) Ensure that the hot air is clean.
(2) Measures should be taken to prevent coke dust and avoid backflow of hot air.
(3) During the drying process of the material, all parts of the equipment in contact with the material must be cleaned and disinfected.
(4) For viscous materials, measures should be taken to minimize sticking.
(5) In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
(6) The exhaust air temperature is allowed to exceed the requirements to ensure product quality and safety.
Links:  google Dehumidifying dryer baidu gravimetric blender Central feeding system
Ask for a quotation
WhatsApp

+8613669807274
Wechat

+8613669807274

wto-btb@wto-btb.com

Tel: +8613669807274

SMS: +8613669807274