Mainly used in plastic products, automobiles, optical discs, experiments, communications, optics, etc.; rotating wheel honeycomb can reach a low dew point minus -40°C for dehumidification and drying. In the case of enhanced configuration, the dehumidification dew point can be as high as -50°C. It is a choice for high-precision industries.
Function description of three-in-one dehumidification dryer:
1. Adopt touch-sensitive human-machine interface, internal use PLC as main control
2. Using Sweden imported dehumidification wheel, long service life
3. Various temperature and delivery parameters are designed and set on the touch screen
4. Various alarms are displayed on the touch screen
5. Delayed start and stop function, which can better protect the electric heater and motor
6. The double cold row design makes the machine operation more stable
Benefits of using three-in-one dehumidification dryer
Poor molding of plastic products mostly originates from poor dehumidification and drying. The American Plastics Association recommends that the plastic before molding must be dried to a moisture content below 0.02%, with poor transparency, sprue sticking, burrs, bubbles, silver bars, flow marks, cracks, poor dimensional stability, internal stress, The shortcomings of the product, such as insufficient physical properties and strength, are mostly caused by insufficient dehumidification and drying of the plastic before molding. Especially highly water-immersed plastics such as PET, PBT, PA, PC, etc. require ultra-low dew point Dew point-40℃ drying equipment
Working principle of three-in-one dehumidification dryer
The dehumidifier can be dried to a moisture content below 0.02%, which solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, insufficient product physical strength, etc.
The dehumidification, drying and feeding equipment series is a combination of three machines. The device consists of three parts: a non-heat dehumidification dryer, a heat-preserving drying barrel and an all-stainless steel suction machine. The suction machine can transport the raw materials from the drying barrel to the forming machine, and can also transport the raw materials from the storage barrel to the drying barrel. According to customer needs, one kind of raw material can be delivered to two molding machines, vacuum motors and safety filter dust collectors are installed inside the machine. According to the production needs of different products, we can provide a powder-removing suction machine to separate the powder in the raw material and capture it. This device has a compact structure and is suitable for the production of precision injection products using engineering plastics such as connectors, precision gears, mobile phone communications, digital cameras and product size requirements, so that the moisture content of the raw materials after wet and dry is low and stable, which can meet strict requirements Technical and quality requirements
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274