The three-in-one dehumidifying and drying feeder integrates three functions of dehumidification, drying, and two-stage feeding. It is widely used in various plastic materials, especially factory plastics with strong moisture absorption, such as PA, PC, PBT, PRT, etc., the SCD-H type can reach a dew point as low as -40°C in an ideal state. This series of products uses honeycomb series rotary dehumidifier with a combination of down-blowing all stainless steel European heat preservation and drying barrels. to make. The whole series adopts the P.I.D temperature control system as standard equipment, and also provides PLC control with LCD touch-sensitive man-machine interface for purchase, and provides dew point meter and automatic filling machine options.
Features of this machine:
1. The three-machine integrated dehumidification, drying and feeding combination are all equipped with honeycomb runners, which can obtain stable dew-point dry air. The shape is divided into two types: semi-open and fully sealed;
2. Suitable for factory plastic materials with strong hygroscopicity such as PA, PC, PBT, PRT, etc.;
3. It integrates three functions of dehumidification, drying and two-stage feeding, and can choose three-stage feeding function;
4. The heat-preserving drying barrel adopts a lower blowing pipe design and a cyclone exhaust device to prevent heat loss, ensure temperature, and improve drying efficiency;
5. All machines are equipped with a feeding system with closed loops to prevent the dried raw materials from being damp again due to contact with outside air;
6. This series of dehumidification system adopts double cooler structure to ensure lower return air temperature and dew point;
7. The feeding system is equipped with a shutoff valve to ensure that there is no residual raw material in the material pipe;
8. The machine is equipped with microcomputer control as standard equipment, and PLC control and LCD touch man-machine interface can be purchased, the operation is centralized and convenient, and the whole machine can be controlled to run automatically;
9. Optional dew point meter to monitor the dew point at any time.
1. It integrates three functions of dehumidification, drying, and bai two-stage feeding;
2. The dehumidification part is equipped with a wheel device, which can provide stable and low dew point air, and the dew point can reach below -40℃;
3. The stainless steel double-layer heat preservation drying barrel adopts the design of lower blowing pipe to make the raw materials evenly dry and effectively prevent heat loss;
4. The feeding system is equipped with a shut-off valve to ensure that there is no residual raw material in the material pipe;
5. The closed feeding system can prevent the raw materials from being polluted or re-moisture;
6. The optical grade GCD-OP model is matched with a boiling electric eye hopper, which can remove the fine powder in the raw material, and can avoid pollution during the molding of optical grade products.
Point generation;
7. The optical-grade GCD-OP model system is equipped with high-precision and high-efficiency filters, which can effectively filter dust ions up to 0.3μm, and the filtration rate is up to 99.9%;
8. PLC control with LCD touch-sensitive man-machine interface can be purchased, the operation is centralized and convenient, and the whole machine can be controlled to run automatically;
9. Dew point detection device can be purchased;
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274