Monotonic temperature of desiccant dryer
It refers to the temperature of the air entering the monotonous barrel. Each material is due to its physical properties, such as molecular structure, specific gravity, specific heat, transmittance and other factors. When the temperature is monotonous, the temperature is allowed to be bound. When the temperature is too high, the range is partially added. Transpiration and agglomeration are too low and some crystalline materials cannot meet the required monotonous conditions, such as: PC/120℃, ABS/80~95℃.
In addition, insulation is required for the selection of dry barrels to prevent monotonic temperature leakage, which constitutes a monotonic temperature increase or power consumption. The dew point temperature refers to the temperature at which the contained moisture is condensed into water droplets when the gas is cooled. It is a measure that the less moisture in the gas, the lower the dew point temperature. The dew point of an excellent dehumidification monotonic machine must be able to reach a dew point temperature of -40°C. Monotonic time refers to the pre-monotonic time before the material is formed. Too long monotonic time will cause material change or agglomeration or spoil the power. Too short monotonic time will cause excessive composition rate. For example, PC / 3-4 hours, ABS / 3-4 hours. The air volume is the only preface that takes away the moisture in the quality guess. The air volume will affect the dehumidification effect. If the air volume is too high, the return air temperature will be too high, which will cause overlap (overheating) and affect the stability of the dew point. The product achieves the aspirational mechanical, electrical, dimensional stability and appearance. Because the dehumidification monotonic machine uses very monotonous air to dehumidify, it can change the drying time and save man-hours. It can prevent the occurrence of defective products and the loss of returned goods, and reduce the occurrence of waste. Fourth, the air of the dehumidification monotoner replaces the closed circulation system and filters at the same time, so it is not affected by the external climate, and it can prevent dust from polluting the plant and improve the working environment. An excellent monotonic power determining factor is: monotonic temperature (drying temperature), dew point (dew point), monotonic time (dwell time) and air volume (air flow). These four factors are interlocked, and any one of the conditions is introduced. Will affect the monotonous effect.
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274