PET desiccant dryers generally use dry air to dry plastics to avoid moisture and mildew of industrial plastics with strong hygroscopicity, which will affect the production and quality of plastic products. In order to extend the service life and performance of the desiccant dryers, it is necessary Maintenance work, then what are the maintenance methods of the PET dehumidifier dryer? The following Hengrong Machinery will organize and introduce for everyone.
1. Pay attention to the place where it is placed and used, and do not use it in an overly confined and narrow space. If there are objects or walls around, keep a distance of more than 50 cm. And do not use it in a place with a lot of oily smoke, otherwise it may cause the loss of the heat exchanger function.
2. The indoor temperature suitable for the dehumidification dryer, the room temperature is around 12℃~35℃, the function of the dehumidifier is the best time it can perform. If it is a room temperature below 12°C, usually the humidity in the air is already very low. In order to avoid excessive dryness and cause physical discomfort, it is recommended that you do not use a dehumidifier.
3. To clean the body of the PET dehumidifier dryer, when dealing with the cleaning problem of the industrial dehumidifier, you must use a neutral detergent, or directly wipe the dehumidifier with a soft wet cloth. Causes varying degrees of damage to the body.
4. Do not restart the PET desiccant dryer immediately after the machine is turned off. After stopping the operation, you must wait three minutes before restarting, so as to extend the service life of the compressor. At present, the new dehumidifier has a self-protection function, so if you press the start button immediately after shutting down, it may not work. This is normal.
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274