Ordinary dryers use electric heating and hot air to dry the materials in the space at a high temperature, so as to evaporate water from the materials. The incoming air heated by the electric heating is the air in the environment. In dry weather and humid weather, the moisture content in the air is different. Therefore, when the weather is wet, incomplete drying of the material will occur. Because electric heating must first heat the incoming air, but the incoming air contains high moisture, and the material is difficult to dry thoroughly.
For this reason, plastic desiccant dryers came into being. In view of the above situation, firstly, the ambient air is drawn in to remove the moisture in the air at a low dew point, and then relatively dry air is used to heat the material into the dryer to dry the material.
Therefore, the difference between these two dryers is that the moisture content of the inlet air used for drying is different. One has processed the inlet air moisture, and the other has not processed the inlet air moisture.
Plastic desiccant dryer is an equipment that automatically lifts and dehydrates plastics after being crushed and washed. It is mainly used for the final process after cyclic rough washing, crushing washing, and rinsing to replace manual fishing, and adds the functions of first-level cleaning and automatic high-speed dehydration , Its dehydration rate can reach 90%, so as to save labor, improve cleaning quality, save power consumption and the obvious purpose of being matched with automatic conveying device to form a higher level of automated assembly line production.
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274